OHAUS PX Serie Guia Del Usuario página 8

EN-4
CONTROL FUNCTIONS
Button
Primary
Function
(Short
Press)
Secondary
Function
(Press and
Hold)
(Extended
Press)
Menu
Function
(Short
Press)
DISPLAY
Net (NET)
Stability (*)
Negative (-)
Centre of Zero (>0<)
Preset tare (PT)
Instructional Messages
3.2 Principal Functions
Zeroing:
Taring:
Weighing:
On / Zero
If the balance is Off,
turns on the balance.
If the balance is On,
sets zero.
Off
Zeros the current
value.
None
Yes
Accepts the current
(blinking) setting on
the display.
Press to zero the balance.
Zero
With no load on the pan, press
empty container on the pan and press Tare. Add material to the container
and its net weight is displayed. After the container and the objects are
removed, the tare value will be displayed as a negative number. Press Tare
to clear.
First press Zero to set the display to zero. Place an object on the pan. The
display indicates the gross weight.
Print
Sends the current
displayed value to
the serial interface.
Unit
Changes weighing
units.
None
No
Rejects the current
(blinking) setting on
the display.
Increments a value
being entered.
to set the display to zero. Place an
Zero
Function
Operation is
dependent on the
application mode.
Mode
Changes
application mode.
None
Back
Reverts back to
previous menu
item.
Decrements a
value being
entered.
Tare
Performs tare
operation.
Menu-Cal
Enters the main
menu. Calibration
is the first sub-
menu.
Views the preset
Tare value.
Exit
Immediately exits
the sub-menu.
Aborts a
calibration in
progress.
Result Field:
Information varies by
application
Unit