Idiomas disponibles
Idiomas disponibles
32 | English
Open the file browser on your PC and select the Bosch_GIC drive. The saved files can be
copied from the internal memory of the inspection camera, moved to your PC or deleted.
As soon as you have completed the required operation, disconnect the drive following
the standard procedure.
Note: Always disconnect the drive from the operating system of the PC first (eject drive),
as failure to do so may damage the internal memory of the inspection camera.
Remove the USB Type-C® cable (the inspection camera will switch off automatically).
Close the upper flap (16) to protect against dust or splashes.
Note: Only use the USB Type-C® interface to connect the inspection camera to a PC. The
inspection camera may be damaged if connected to other devices.
Note: The USB Type-C® interface can only be used for data transfer. Rechargeable bat-
teries or other devices cannot be charged by this interface.
Working Advice
Check the environment that you want to inspect, paying particular attention to obstacles
or hazardous areas.
Bend the camera cable (1) so that the camera head can be easily introduced into the en-
vironment to be inspected. Carefully introduce the camera cable.
Adjust the brightness of the camera illumination light (3) so that the image is easily re-
cognisable. When photographing highly reflective objects, for example, you can achieve
better results in lower light or using black and white contrast setting.
If objects to be inspected look blurred, then reduce or increase the distance between
camera head (2) and object.
Errors – causes and corrective measures
Error indicator
Cause
in the display
Internal memory al-
most full
(yellow warning)
Internal memory full Delete the files from the internal memory.
Error in the internal
memory
(red warning)
1 609 92A 8H6 | (07.03.2023)
Corrective measures
Delete the files from the internal memory.
Restart the inspection camera.
If the problem persists, contact an authorised
Bosch after-sales service centre.
Bosch Power Tools
