Kenmore Stratus DS1020 Manual De Uso Y Cuidado página 13

Idiomas disponibles

Idiomas disponibles

EMPTYING DUST CUP AND CLEANING FILTER
4. Remove the non-woven filter from the
filter basket. With a soft and dry brush,
clean any accumulated debris from the
side screens of the filter and the filter
basket.
5. After repeated use, it may be necessary
to wash the filter basket and filter. First
brush loose debris from both basket and
filter, then hand wash basket and filter in
warm water and rinse with clean water.
After washing, set aside and allow to air
dry for 24 hours.
NOTE:
Do not scrub the non-woven
filter.
IMPORTANT:
filter must be completely dry before reuse.
The filter basket and
6. Insert the clean, dry filter into the
basket and fit the basket into the dust
cup ensuring an air tight seal is formed
around the dust cup opening.
7. Reconnect the dust cup to the hand
vacuum. To do so, position the locking
tab on the handheld unit within the
locking groove located on the bottom of
the dust cup. Press the other end of the
dust cup into position until you hear a
'click'.
- 13 -
loading