Idiomas disponibles
Idiomas disponibles
13.3
Charger
Charger is integrated in the battery box system.
Charging the battery:
1. Connect the charger to the power supply (AC outlet) 230 V / 50 Hz and the charger plug.
2. Charge the battery
3. Once the battery is fully charged (indication on the charger) the charger can be removed.
LED- indication on the control element:
Voltage-display on battery box indicates the status of the battery.
Voltage display shows 42 V
Voltage display shows 35 V
Voltage display shows < 30 V
14
MAINTENANCE
Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location
14.1
Maintenance plan
After each workshift:
14.2
Cleaning
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-EWB500LI-AKKU
longer period of time, please activate mechanical brakes
(3) on both rear wheels.
Note: Braking function EBS requires battery energy,
designed for short times only (max. 5 minutes)
After activation of the mechanic brakes turn switch (1) to
position "0")
Battery capacity 100%
Battery capacity ~50%
Please charge the battery (too less capacity left)
NOTICE
•
Check the cables (tight fit, damage)
•
Clean the outer parts with a damp sponge.
•
Never clean the electronic parts with water!
•
Check the machine and remove the deposits and / or residues with a
brush
ATTENTION
NOTICE
24
