Epson TM-U950 Manual Del Usuario página 9

Using the MICR Reader (Option)
The optional, factory-installed magnetic ink character recognition
(MICR) reader lets the printer read MICR ink on personal checks.
CAUTION:
To prevent paper jams, be sure both paper rolls are installed.
Do not insert checks with staples in them; do not insert wrinkled checks.
1. The SLIP light flashes.
2. Insert the check face down,
with the MICR characters on
the right-hand side.
3. Insert the check straight into
the inlet, using the right edge
of the inlet as a guide, as far as
the check will go. See
illustration
4. The printer starts drawing the
check in. Let go of the check
immediately. The SLIP LED
goes from blinking to on.
5. When MICR reading is complete, the printer ejects the check
and the SLIP LED starts blinking again.
6. Remove the check by pulling it straight out (not at an angle).
The SLIP LED goes off.
Cleaning the Optional MICR Mechanism
Clean the MICR head and MICR roller every 6000 passes or once a
month.
Note:
If you encounter frequent MICR reading errors, use the procedure below.
For the MICR head
Use a moistened cleaning sheet, such as PRESAT brand (KIC) "Check
Reader Cleaning Card" or an equivalent commercially available
cleaning sheet.
For the MICR feed roller
Use an adhesive cleaning sheet available from EPSON. Contact your
dealer.
.
9
9
TM-U950 User's Manual 7
English