Epson TM-U950 Manual Del Usuario página 7

4. For each roll, insert the tip of
the paper into the paper inlet
and push it in until it is
automatically detected and
fed into the printer. See
illustration
5. Tear off the receipt paper on
the cutter. If the paper was not
fed far enough, press the
RECEIPT FEED button to feed
additional paper.
6. Insert the tip of the journal paper into
the groove in the take-up spool and
rotate the spool two or three times to
secure the paper. See illustration
not enough paper was fed, press
JOURNAL/SLIP FEED to feed more.
7. Install the take-up spool and close the
printer cover.
8. To remove the journal paper roll,
first lift the take-up spool and
cut the paper. Then remove the
take-up spool. See illustration
9. For either a journal or receipt
paper roll, next press the release
lever (marked PRESS) on the
appropriate side of the printer,
pull out the paper, and remove
the roll.
.
4
4
5 . If
5
✄
.
6
6
TM-U950 User's Manual 5
English