Silvercrest SHTT 2200 B1 Instrucciones De Uso página 21

Preparation
1) Remove all parts of the appliance and the operating instructions from the carton.
2) Remove all packaging material.
Operation
This appliance is fitted with a contact sensor. This means that the hairdryer only
switches on if you are holding it in your hand and touching the sensor field
at the same time.
Heating and blower levels
1) Insert the plug into the mains power socket.
The hairdryer is fitted with two function switches. You can use these to separately
select the strength of the air flow (blower level switch
level switch
Blower levels
0
Heat levels
2) Select the desired blower level using the blower level switch
lamp
sensor field
3) Select the desired heating level using the heating level switch
4) If you are not holding the hairdryer in the hand:
take hold of the hairdryer with your hand on its handle. This means that you
will be touching the sensor field
If you put the hairdryer down for a short time, it will switch off automatically.
■ 18 │ GB │ IE
):
hairdryer is switched off
reduced airflow
increased airflow
reduced heat level
medium heat level
high heat level
illuminates and shows that the hairdryer will start as soon as the
is contacted.
) and the heat level (heat
and the hairdryer will switch on.
. The control
.
SHTT 2200 B1