5. MANUAL SCAN
Select MANUAL SCAN submenu which is also
shown in the status bar. Get to the option of audio
mode, with the status bar indicating 'MANUAL
SCANNING', then use
incidental sound mode out of BG/I/DK/L/L1, and
s c a n m a n u a l l y f o r w a r d o r b a c k w a r d
with
button. Once a program is detected the
scan process shall stop; then you may start
MANUAL SCAN again by pressing
6. ADJSUT FRE
When the signal is rather weak or the aerial is not
in good condition, some channels can't be
accurately tuned, then you can use such function
operation to adapt the pictures to its best quality.
Select the ADJUST FRE item with the status bar
indicating FREQUENCE ADJUST, then conduct fine
tuning with
button. The frequency can be
adjusted within 0-60.
7. PROGRAM TABLE
Select the PROGRAM TAB submenu, then the
status bar will show 'PROGRAM TAB'. Press
button to shift to program table, where the status
bar indicates 'OK-ENT, YELL-DEL, WHIT-MOVE.'
Use
button to select a program then press
OK to confirm and play it.
By pressing the yellow button you can delete a
program. When the status bar shows' DELETE?
OK-OK EXIT-CANCEL', press OK to delete the
program, and press EXIT to cancel DELETE
operation.
By pressing the white button you shall be able to
move a program to any position and change their orders. The status bar shall display 'MOVE PROGRAM',
and then you can move the desired program by pressing OK, followed by using
expected position. Press OK to confirm or EXIT to quit.
8. Shortcut operation
Channel switch with number buttons: .direct input the desired channel no., wait for 2 seconds or press
OK button, the unit will go to the chosen channel.
Remarks: for the channel chosen function via directly input the digits on the remote control in the TV
status, the system is default to channle number 1 in case you press the 0 button; also the lastest
programme number in case you input the value more than the programmes you saved to avoid
misunderstanding. For example, the unit saved 10 programmes after scan, in case you input 0 button,
the system will change to programme 1, in case you input 11 or bigger figures, the system will change
to programme 10.
Get back to a channel: pressing LAST button shall turn back to the channel played last time.
Sequential channel switch: use
Volume adjustment: you can adjust the volume of the set by pressing
Mute adjustment: Pressing MUTE button on the remote control to switch on/ off the mute status.
Section 2: DVB-T Menu operation
Tips for Menu operation
You can press the button on the remote control to pop up the option list when there appears a
symbol on the right of a menu item, then use
by pressing OK button, or you can exit from the list without making any choice with
1. Main Menu
Press MENU key to brows the Main Menu which includes 4 submenu items on the screen.:
Service
Scan
Setup
EPG
Bmt-76.p65
Operation
button to choose one
button.
button to get to the previous or next channel one by one.
-33-
33
to move to your desired option item before confirming
06-4-10, 19:33
to move it to
button.
button.