Measurement Of Resistance - Steren MUL-115 Manual De Instrucciones

Measurement of alternating current
1. Set the selector to "400/1000 A
2. Open the hook by pressing the trigger and insert a cable into the hook.
3. Close the handle and get the reading on the screen.
Note:
Before this measurement, disconnect the test lead for safety.

Measurement of resistance

1. Connect the black test lead to the "COM" connector and the red test lead to the "V Hz" connector.
2. Set the selector to "
to select the resistance measurement.
3. Connect the test leads through the circuit to be tested.
4. Read the result on the screen.
Caution: Ensure that the circuit to be tested is not
Energy
Measurements
".
", the function must be resistance measurement, if other, press SELECT
Ω
OFF
V
Ω
- - -
CAP
Hz
ºC
- - -
200A
- - -
1000A
400A/
1000A
DH> 2 sec
REL Hz/Duty
RANGE
SELECT
Ω
V
Ω
- - -
CAP
Hz
ºC
- - -
200A
- - -
1000A
400A/
DH> 2 sec
RANGE
SELECT
OFF
1000A
REL Hz/Duty
9