Cameo AURO BEAM 200 DC Manual De Usuario página 10

Tabla de contenido
P/T Macro
000
(Pan/Tilt
006
macro)
041
076
111
146
181
216
P/T speed
000
(Pan/Tilt
speed)
DEVICE SETTINGS (Settings)
Press MODE to access the selection menu. Using  and , select the menu item "Settings" (dark background) and confirm with ENTER.
System Settings
DMX Address
001
Mode
DMX 16CH
Settings
System Info
This will take you to the submenu for setting the following submenu items (adjust setting with  and  and confirm with ENTER):
Settings
Lamp
=
Lamp default
=
Display Rev
=
Display
=
DMX Fail
=
Pan Angle
=
Pan Rev
=
Tilt Rev
=
Feedback
=
Mov Blackout
=
10
005
off
040
PAN small > big
075
TILT small > big
110
PAN/TILT small > big
145
PAN/TILT (inverse) small > big
180
Circle small > big
215
Circle (inverse) small > big
255
Random small > big
255
Pan/Tilt Fast -> Slow
Switch on/off of the
On
discharge lamp
Off
Operating status of the
On
discharge lamp after
Last
restart of spotlight
Off
Flip display
On
Off
Display lighting
On
Off
Operating status with
Hold
DMX signal fault
Auto
Blackout
Pan angle
630
540
Pan reverse
On
Off
Tilt Reverse
On
Off
Position correction
On
Off
Automatic blackout
On
during head movement
Off
Switch on discharge lamp
Switch off discharge lamp
Discharge lamp switched on
Returns to status prior to restart
Discharge lamp switched off
Rotate display by 180° (e.g. for overhead installation)
No display rotation
On permanently
Deactivation after approximately 1 minute of inactivity
Last command is retained
activates Auto mode
Activates blackout
Pan angle 630°
Pan angle 540°
reverses pan direction
do reverse of pan direction
reverses tilt direction
does not reverse tilt direction
Automatic position correction is enabled
Automatic position correction is disabled
Blackout during head movement
No blackout during head movement
Tabla de contenido
loading

Este manual también es adecuado para:

Clab200dc

Tabla de contenido