Tabla de contenido
Idiomas disponibles
Idiomas disponibles
areas, a series of safety instructions have to be followed that this manual can only give in part. The operator
must therefore inform himself on the current safety instructions and consider them.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Install the safety bond by inserting the quick link in the hole on the bottom of the base Pull the safety bond
over the trussing system etc. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!
DANGER TO LIFE!
35/95
The fixture's base enables to
be mounted in two ways.
For overhead use (mounting
height
>100
cm),
always
install an appropriate safety
bond.
You must only use safety
bonds complying with DIN
56927, quick links complying
with DIN 56926, shackles
complying with DIN EN 1677-
1 and BGV C1 carbines. The
safety bonds, quick links,
shackles and the carbines
must
be
sufficiently
dimensioned
and
correctly in accordance with
the latest industrial safety
regulations (e. g. BGV C1,
BGI 810-3).
Please note: for overhead
rigging in public or industrial
00025926.DOC, Version 1.5
used
Tabla de contenido
