Bowa TissueSeal PLUS Instrucciones De Uso página 78

7 Preparation
34 TissueSeal / TissueSeal PLUS
Cleaning and disinfection
NOTE
Risk of damage to the HF cable due to incorrect
placement in the CDM!
Ensure that the HF cable is not kinked or pinched.
1. Place the instrument components in the CDM.
Ensure that:
•
the instrument components are positioned to
allow exposure to the rinsing media;
•
clean the handle in the unlatched position,
•
the HF cable is located in a sieve tray with a
cover.
2. Restart the program.
3. After the program is finished, remove the instrument
components from the CDM.
NOTE
Risk of handle damage due to compressed air!
Restrict compressed air pressure to 3 bar or less for
handle drying.
4. Use filtered compressed air to dry the instrument
components.
MN031-443-S0-20110112-EN