Idiomas disponibles
Idiomas disponibles
Connections
Connect the antenna.
1
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
Connect the AC mains lead after all other connections are completed.
2
This unit consumes a small amount of AC power (l 18) even when turned off.
≥ In the interest of energy conservation, if you will not be using this unit for an extended period of time,
unplug it from the mains socket.
≥ These speakers do not have magnetic shielding. Do not place them near a TV, personal computer or other magnetic devices.
≥ Tape the antenna to a wall or column in a position with the least amount of interference.
≥ If radio reception is poor, use a FM outdoor antenna with a right angle type connector (not supplied).
Connect an external music device
1
Connect an external music device using an audio
cable (not supplied).
≥ Plug type: ‰3.5 mm stereo
2
Press [RADIO/AUX] to select "AUX" and start
playback on the connected device.
∫ To select the sound input level of the
external device
1
While in AUX mode, press [SOUND] repeatedly to
select "INPUT LEVEL".
2
Press [3, 4] to select "NORMAL" or "HIGH" and
then press [OK].
≥ The factory default is "NORMAL".
≥ To improve sound distortion when "HIGH" is selected, select "NORMAL".
≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will
distort the sound.
≥ For details, refer to the operating instructions of the device.
To a mains socket
AC mains lead (supplied)
Audio cable
(not supplied)
5
RQT9944
