Progress PBN 1310 Instrucciones De Uso página 7

Safety Thermostat
To avoid dangerous overheating (through
improper use of the appliance or defective
components) the oven is fitted with a safety
thermostat which breaks the electricity
supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat react as a
result of improper use of the appliance, just
eliminate the cause of the defect once the
oven is cooled. If the thermostat reacts
because of a defective component, please
contact customer services.
Before using for the first time
Remove all packaging materials
in and outside the oven before use.
Before using for the first time, the
empty oven should be heated up.
During this time, an unpleasant odour
may be emitted. This is absolutely normal.
It is caused by manufacturing residues.
Ensure that the kitchen is well
ventilated.
1. Turn the oven regulator to hot air
.
2. Turn the temperature regulator to
250°C.
3. Open a window for ventilation.
4. Allow the oven to run empty for
approximately 45 minutes.
Cooling fan
T
he oven is equipped with a cooling fan,
which cools the control panel, the operating
knobs and the oven door handle. The cooling
fan is activated automatically when the oven
is in use. The warm air is blown through the
opening next to the oven door handle. The
cooling fan shuts down when the oven
function switch is in the "
Repeat the procedure for top and bottom
oven element
about 5-10 minutes.
Then let the oven cool down. Now
dampen a soft cloth with warm
water and mild washing-up liquid
and clean the oven cavity.
Before using for the first time,
carefully wash the oven accessories
as well.
Always grasp the handle in the
middle to open the door.
progress 7
0
" position.
and thermal grill for