Elvox 6600 Serie Manual Para El Conexionado Y El Uso página 7

INSTALLATION OF TYPE 6601 WITH BRACKETS TYPE R660
- Make a 120x120mm (nearly) hole in the plasterboard wall
- Fix the bracket to the monitor as indicated in figure, keeping the cur-
sors well aligned to the monitor sides.
- Insert the monitor inside the wall in plasterboard.
- Tighten the screws so as the cursors can get closer to the plasterbo-
ard wall.
- By screwing, the cursors should get aligned orthogonally to the moni-
tor.
- Insert the side grids, paying attention that the one with the slot for the
microphone must be inserted on the right.
2
2
Press to return to index Press to return to index
I N T R O D U C T I O N / I N S T A L L A T I O N
3
1
Fig. 2A
1
INSTALLATION OF TYPE 6701
- Fix the monitor fixing plate at 1,40m. from the ground level to the lower
border.
- Connect the terminal block.
- Insert the monitor according to the 1 and 2 arrow direction
- To remove the monitor from the plate hook, operate with a screw dri-
ver on the security lock (placed on the upper side and behind the
monitor), and remove it according to the 3 and 4 arrow direction.
Surface wall-mounting version
139
141 40
1
INTSLLATION OF TYPE 660C
- Fix the monitor support to the wall and hook the stud to the support.
Table version
141 125
Fig. 2B
4
3
2
125
Fig. 2C
7