Beko RCNE366K40XBN Manual Del Usuario página 4

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 96
1.
Safety and environment instructions
This section provides the safety
instructions necessary to prevent
the risk of injury and material
damage. Failure to observe these
instructions will invalidate all
types of product warranty.
Intended use
WARNING:
Keep ventilation
openings, in the appliance
A
enclosure or in the built-
instructure, clear of
obstruction.
WARNING:
Do not use mechanical
devices or other means
to accelerate the
A
defrosting process,
other than those
recommended by the
manufacturer.
WARNING:
A
Do not damage the
refrigerant circuit.
WARNING:
Do not use electrical
appliances inside
the food storage
A
compartments of
the appliance, unless
they are of the type
recommended by the
manufacturer.
This appliance is intended to be
used in household and similar
applications such as
– staff kitchen areas in shops,
offices and other working
environments;
Refrigerator/User Manual
– farm houses and by clients
in hotels, motels and other
residential type environments;
– bed and breakfast type
environments;
– catering and similar non-retail
applications.
1.1. General safety
This product should not be
used by persons with physical,
sensory and mental disabilities,
without sufficient knowledge
and experience or by children.
The device can only be
used by such persons under
supervision and instruction of
a person responsible for their
safety. Children should not
be allowed to play with this
device.
In case of malfunction, unplug
the device.
After unplugging, wait at least
5 minutes before plugging in
again.
Unplug the product when not
in use.
Do not touch the plug with wet
hands! Do not pull the cable to
plug off, always hold the plug.
Do not plug in the refrigerator
if the socket is loose.
Unplug the product during
installation, maintenance,
cleaning and repair.
If the product will not be used
for a while, unplug the product
and remove any food inside.
Do not use the product when
the compartment with circuit
cards located on the upper
back part of the product
(electrical card box cover) (1) is
open.
5 / 23 EN
loading