Idiomas disponibles
Idiomas disponibles
Choosing a cutting height that is too
high can also cause the blade to be
blocked by the long grass. Please refer
to chapter "Removing blockages".
• Always move across slopes crosswise.
Take special care when going back-
wards and pulling the device.
• Clean the device after each use, as
described in the section "Cleaning/
storage".
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.
Removing blockages
Switch off the machine, remove the
safety key (23) and wait for the bla-
de to come to a stop.
1. Turn the machine over or set up the ma-
chine, see chapter "Storage – Setting
up the machine".
2. Use sturdy gloves and remove the
blockage from the blade (30).
Difference between moving
and mulching lawns
When using the mulch kit (21), the grass
clippings are not captured in a collection
box but are instead shredded and spread
across the lawn. The nutrients contained
in the clippings are thus left to be broken
down by soil organisms and form a nutri-
ent cycle. Mulched lawns therefore need to
be fertilised much less frequently.
As a basic rule, the lawn has to be mowed
relatively often so that only small amounts
of mulch remain on the lawn.
It is therefore best to mulch the lawn at
least once a week and to adjust the mower
so that only about 40% of the total height
of the lawn is left as mulch. If the mulch
remains visible on the lawn (for example
when cutting the lawn for the first time
of the year or during strong growth), the
grass collection bag (12) should be used.
Connecting the machine
with the Lidl Home App
The machine can only be connected
to the Lidl Home App if you are using
it with a smart Performance battery.
1. To insert the smart performance bat-
teries (24) into the machine, slide the
smart performance batteries into the
machine along the guides. You will hear
them click into place.
You must activate the machine, to
do so press the button for the char-
ge level indicator
is now activated and the smart LED
(18) flashes (briefly).
2. Enable Bluetooth
3. Open the Lidl Home App.
From here there are options
for connecting the machine.
If this is the first device you want to
connect to the app:
"At home", select the op-
4. On the tab
tion "Add device".
The app scans the area for available
devices and indicates if available de-
vices have been found.
If this is not the case, read on if
possible
5. If you select "Go to add", the available
devices are displayed in a list.
GB
MT
(20). The machine
on your smartphone.
®
,
,
.
and
41
