Switching Bike Lights On/Off - Bosch Purion Instrucciones De Servicio

– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking
and for cycling in urban traffic
eMTB: Optimum assistance whatever the terrain,
rapid acceleration when starting from a standstill,
improved dynamics, top performance (eMTB is
only available in combination with drive units
BDU250P CX, BDU365, BDU450 CX and
BDU480 CX. This also requires a software update.)
– TURBO: Maximum assistance even at high pedaling
speeds, for biking sports
To increase the assistance level, briefly press the
button + (6) on the on-board computer repeatedly
until the required assistance level appears on the in-
dicator (i). To decrease the assistance level briefly
press the button – (5).
If the display is set to TRIP, TOTAL or RANGE, the se-
lected assistance level will only be shown briefly (for
approx. one second) on the display when switching
over.

Switching bike lights on/off

For the model which has the bike lights powered by
the eBike system, a medium-length press of the but-
ton + will switch on the front and rear lights simulta-
neously. To switch off the bike lights, press and hold
the button +.
The lighting symbol (h) is displayed when the light is
on.
Before starting each journey, check that your bike
lights are working correctly.
The on-board computer saves the light status and ac-
tivates this saved status accordingly after a restart.
Switching the bike lights on and off has no effect on
the backlighting of the display.
Bosch eBike Systems
English – 9
1 270 U20 XBP | (08.04.2020)