Makita XBU07 Manual De Instrucciones página 6

Sopladora aspiradora inalámbrica
Idiomas disponibles

Idiomas disponibles

ASSEMBLY
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Installing or removing the wheels
To install the wheels, insert the claw of the wheels into
the slot of the nozzle as shown in the figure.
Fig.1
► 1. Claw 2. Slot
To remove the wheels, slide the claw upward slightly,
and then remove the wheels.
Fig.2
► 1. Claw
1
2
1
Installing the nozzle
Loosen and remove the screw of the main unit. Align the
protrusions on the nozzle with the grooves on the main
unit, then insert the nozzle into the main unit until the
protrusions snap into place. Tighten the screw securely
to fix the nozzle.
Fig.3
► 1. Screw 2. Nozzle 3. Protrusion
To remove the nozzle, perform the installation proce-
dure in reverse.
6 ENGLISH
1
3
2
loading

Este manual también es adecuado para:

Xbu07z