Triton TBJ 001 Instrucciones De Uso Y De Seguridad página 6

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
WARNING: Moving parts can cause crush and cut injuries
Caution!
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Technical Abbreviations Key
GB
V
Volts
~, AC
Alternating current
A, mA Ampere, milli-Amp
n0 No load speed
n Rated speed
° Degrees
Ø Diameter
6
Original Instructions
Hz
Hertz
, DC
Direct current
W, kW Watt, kilowatt
/min or min -1 Operations per minute
dB(A) Decibel sound level (A
weighted)
m/s 2 Metres per second
squared (vibration
magnitude)
Specification
Model no:
Voltage:
Input power:
No load speed:
Fence angle range:
Maximum cutting depth:
Blade diameter:
Blade:
Bore:
Height adjustment:
Ingress protection:
Protection class:
Power cord length:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of Triton products may
alter without notice.
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration
Uncertainty
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
TBJ001
230V~ 50Hz
760W
11,600min
-1
0 - 90°
18mm
Ø100mm
Ø100 x Ø22 x 3.92mm x 6T
Ø22mm
0 - 40mm
IP20
3m
460 x 138 x 145mm
2.65kg
92dB(A)
103dB(A)
3dB
3.27m/s
2
1.5m/s
2