Dolmar ES-34 TLC Manual De Instrucciones página 8

ENGLISH (Original instructions)
1. Chain brake applied
2. Chain brake released
3. Rear handle
4. Switch trigger
5. Oil filler cap
6. Front handle
7. Front hand guard
8. Guide bar
9. Saw chain
10. Lever
11. Sprocket cover
12. Adjusting dial
13. Rear hand guard
14. Oil level sight
15. Spike bumper
16. Lock-off button
SPECIFICATIONS
Model
Max. chain speed
Standard guide bar
Standard saw chain
Recommended guide bar length
Overall length (without guide bar)
Net weight
Extension cable (optional)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual and follow the
warnings and safety instructions.
...... Wear eye protection.
....... Wear ear protection.
............... DOUBLE INSULATION
.................. Caution: particular care and attention
required!
.................. Caution: withdraw the mains plug
immediately if the cable is damaged!
................. Caution: kickback!
................ Protect against rain and damp!
8
Explanation of general view
17. Chain catcher
18. Guide bar cover
19. Cord hook
20. Adjusting screw for oil pump
(at the bottom)
21. Sprocket
22. Hole
23. Hook
24. Pin
25. Loosen
26. Tighten
27. Tool's cord
28. Extension cord
29. Plug and socket (the shape may
differ from country to country)
30. Strap
Bar length
Cutting length
Guide bar type
Type
Pitch
No. of drive links
END218-7
ES-34 TLC
14.5 m/s (870 m/min)
300 mm
265 mm
Sprocket nose bar
291 (90PX)
46
300 - 400 mm
4.6 kg
DIN 57282/HO 7RN -F L = 30 m max., 3 x 1.5 mm
................. Wear a helmet, goggles and ear
................. Wear safety gloves!
................. Withdraw the mains plug!
.................. First aid
......... Maximum permissible length of cut
......... Direction of chain travel
................... Chain oil
.......... Chain brake released
.......... Chain brake applied
................. Prohibited!
31. Lock
32. Unlock
33. Felling area
34. Felling direction
35. Danger zone
36. Escape route
37. Cutter length
38. Distance between cutting edge and
depth gauge
39. Minimum 3 mm
40. Side plate angle
41. Oil guide groove
42. Oil feed hole
ES-39 TLC
350 mm
325 mm
291 (90PX)
3/8"
52
455 mm
4.7 kg
protection!
ES-43 TLC
400 mm
360 mm
492 (91PX)
56
4.7 kg
2