Idiomas disponibles
Idiomas disponibles
SERIES
Version
Display user instructions
Important information about safe use:
1. Before plugging or unplugging the display, please make sure to cut off
the power supply of Ebike first. Plugging or unplugging with power will
cause permanent electrical damage to the display;
2. When installing the display on the handlebar, do not over tighten the
hexagon socket screws. Normally, 0.2N.m of torque can securely install the
instrument on the handlebar. Excessive tightening will cause damage to
the instrument structure.
3. Do not immerse the display in water or use water spray to clean the
meter. When cleaning, please use a soft cloth dampened with water to
wipe. Do not use any cleaning agents to wipe.
4. The USB charging port on the display cannot provide waterproof
protection when in use. When riding in the rain, please make sure that the
protective rubber of the USB port is closed tightly. It is forbidden to use
the display to connect external devices in the rain.
5. Do not dispose of the display or any other Ebike accessories as
residential garbage. Please abide by local laws and regulations, and dispose
of or recycle Ebike accessories in an environmentally friendly manner.
6. The damage or failure of the display caused by improper installation or
use is not covered by the after-sales warranty.
EN
11
