FAFREES F26 PRO Manual Del Usuario página 13

Display installation：
1.The display can be installed only after the handlebar is installed. For the convenience of installation,
as shown in the left picture above, one of the pipe clamps of the instrument can be completely
removed first.
2.Gently open the fixing pipe clamp of the instrument first, in order to install it firmly, first place the
pipe clamp gasket on the handlebar tube, and then clamp the pipe clamp into the handlebar tube,
as shown in the middle picture above.
3.Tighten the screws behind the pipe clamps of the display to fix it, as shown in the right picture below.
4.Loosen the fixing clip of the button unit, click it into the handlebar tube, and then tighten the fixing
screw, as shown in the figure below.
EN 07