Idiomas disponibles
Idiomas disponibles
8.Loosen the 4 screws of the handlebar stem, place the handlebar and adjust
the horizontal angle of the handlebar, and then fix it with the pipe clamp screws.
9.Tighten each fixing screw with a hexagonal key to fix the handlebar stem to ensure that there is
no looseness of the handlebar.
10.Loosen the headlight fixing screw on the front fork, fix the front mudboard fixing hook and the
headlight bracket together with the screw on the front fork, and then use the screw to fix the front
mudboard support on the front fork, as shown in the right picture above.
11.Place the wheel reflector on the spoke, press the clip into the hole, and use a tool to rotate the clip to lock.
EN
05
