Idiomas disponibles
Idiomas disponibles
< EN >
Please carefully read the instructions before assembling and using the product. Keep
the instructions for future reference.
Be careful when unpacking and assembling the product.
This product must be assembled by a responsible adult.
Remove all the parts which are not necessary for play before giving the product to
your child.
Warning! Do not step or stand on back of frame which will cause product
overturned.
Tricycle mode: Warning! Not to be used by children over 36 months; insuf cient
strength to support.
Do not use on wet days, or on wet ground.
How to assemble EXPLORER TRIKE 4in1 DELUXE PLAY
1. The front wheel's fork needs to be aligned with the frame of the trike; then insert
the stem of the front wheel's fork into the frame.
2. Take the handlebars and align them with the front wheel by making sure the stem
of the front wheel's fork slots into the handlebars' column. Make sure the
handlebars are placed in the correct direction with the top column facing
outwards, away from the seat. Push the handlebars down until you hear a click to
securely x them in place.
3. Turn the pedal locks of the front wheel in the direction of the unlocked symbol;
place the pedals in the front wheel's slots. Turn the pedal lock in the direction of
the locked symbol to secure the pedals in the front wheel. You need to hold the
pedal with one hand and turn the pedal lock towards the direction of the locked
symbol with the other hand until the lock clicks into place.
4. The parking devices on the rear wheels must be pointing inward when they are
installed for all trike stages. See below instructions on how to install the parking
bar on the wheels:
a. Install the bar inside the dedicated hole of the parking device on one of the
rear wheels.
b. Put the parking bar inside the 2nd hole located on the parking device of the
other rear wheel.
c. Install both wheels with the parking bar into the trike's frame. Place both wheels
in the hexagonal slots at the rear of the trike frame and ensure that the parking
devices are upwards and don't touch the ground. Once the wheels are in the
correct position, you need to screw the knobs into the wheels' slot to ensure the
wheels will remain securely in place.
d. Make sure the bar is securely xed before using the product.
Warning! The parking bar of the parking system is only applicable for the infant
trike mode. Remove the parking bar before using the products in other modes.
5. To insert the saddle, you must rst open the clamp and press the bottom
spring-loaded button on the saddle stem. Then, push the saddle down until you
hear a click. Close the clamp. The saddle is adjustable with 2 available heights
(31cm; 34cm). The minimum insertion depth is where "MAX" is marked on the
stem when placing the top spring-loaded button in the saddle's stem hole. This is
the highest height of the saddle. The maximum insertion of the saddle is pushing
the saddle down until the saddle's stem is all the way down. This is the lowest
height of the saddle.
6. Take the footrest and slide it up the saddle stem. You must press the spring-loaded
button at the bottom of the saddle stem; the footrest is secure once you hear a
click and twist the knob under the footrest to 90 degrees. The footrest must be
facing forwards, not backwards, to be in the correct position.
Warning! Check footrest is securely locked before every use.
7. Assemble the safety bar by rst unscrewing the top cap of the middle safety bar.
Next, put one side of the safety bar on top of the middle safety bar, followed by
the other side. Take the LED module, align the protrusions at the bottom with the
slot of the module holder, put it in and tighten the module by turning it clockwise.
Screw it on top of the middle safety bar to secure the right and left safety bars.
Correct assembly of the safety bar will show both safety bar sides at the same
height.
8. Put the seat on top of the saddle; make sure the knob on the seat is aligned with
the saddle slot, so it can slide through the saddle slot. To secure the seat to the
saddle, turn the knob under the seat 90 degrees. Insert the middle safety bar in
the hole at the front of the seat; press the red button on the side of the middle
safety bar and push until the red button is hidden in the seat. Slide the sides of
the safety bar into the gaps on the side of the seat.
9. To assemble the parent handlebar, take the top part of the parent handle, where
there is the black handle, and place it into the bottom shaft by pressing the
spring-loaded button. There are 2 available heights on the parent handlebar
(92cm; 96.5cm). Make sure to align the spring-loaded button with the holes; you
must hear a click to ensure the handle is securely in place. To secure the parent
handlebar to the trike, carefully place the shaft through the saddle's hole and
into the hole on the trike's frame. Once you hear a click, the pole is secure.
* To remove the parent handle, you must press the red button under the trike's
frame; then release the shaft and carefully lift the parent handle out.
10. Insert the headrest to the seat.
11. Slide the canopy into the opening at the back of the seat's backrest until you
hear a click.
12. Take the plastic platform and slot into the 3 holes at the rear of the TRIKE body,
press them by hand to make sure the platform is securely xed onto the frame.
13. To x the bag, x the bottom rear Velcro strap to the base of the parent handlebar;
x the middle rear Velcro strap to the middle of the parent handlebar; hook the
top part of the bag to the parent handlebar and x both elastic hoops to the
base of the plastic platform. Make sure the bag is securely x before starting to
use the product.
Warning! The bag is not a toy; don't let children play with the bag. The bag is
just for parent storage. 2 kg max. Overloading the bag may cause a
hazardous unstable condition.
14. Slide the cup holder into the slot on the parent handle until you hear a click.
Warning! Don't overload the cup holder. 900g (2lbs) max. Overloading the cup
holder may cause a hazardous unstable condition.
Warning! Check the seat and safety bar are securely locked before
every use.
Secure your child on the infant trike:
- 5-point harness system is set on the
seat; adjust the slider on each strap
before rst use. The shoulder straps
and the waist straps should t rmly
around the child.
- To buckle, slot the end of the shoulder
strap to the end of the waist strap, do
the same on both left and right sides.
- Then, insert both components to the
buckle housing on the leg-between
strap until you here a click.
- Double check it is securely locked and all the 5 straps' length are well t to the
child.
Warning! Always fasten with the 5-point harness while using the trike with the
seat on it.
Warning! Secure the child in the harness at all times.
How to operate the freewheel mode:
The front wheel has two modes of operation.
- Unlocked mode: when the pedals are turning
independently from the front wheel.
- Locked mode: when the pedals and the front
wheel are connected together and move as one.
- To put the front wheel in Locked mode, you need
to align the spot on the red button to the arrows on
the inner hub; press the red button on the locked
symbol side until you hear a click.
- To put the front wheel in Unlocked mode, you need to align the spot on the red
button to the arrows on the inner hub; press the red button on the unlocked
symbol side until you hear a click.
Warning! Freewheel function is to be used only with the parent handle (Push
bar).
Warning! Check that the push bar (parent handle) is locked in position before
use.
Warning! Automatic freewheeling ensures the tricycle can be pushed safely
while the child's feet rest on the pedals without the pedals turning.
How to operate the parking devices:
- To operate the rear wheels' parking devices, you need to push the parking
devices down by applying pressure with your foot on the parking bar (infant trike
mode only) or directly on the parking devices (other modes). You must always
use both rear parking devices when you need to stop the tricycle from moving.
The parking devices are locked, and the tricycle will remain stationary once you
hear a click after pushing down both parking devices.
- To unlock the parking devices, you need to fully lift up the parking bar (infant trike
mode only) or both parking devices (other modes) with your foot. The tricycle is
mobile once you hear a click after pushing up both parking devices.
- The left parking device controls the left-hand side rear wheel, and the right
parking device controls the right-hand side rear wheel. The parking bar for the
infant trike mode controls the parking devices.
Warning! The parking bar of the parking system is only applicable for the infant
trike mode. Remove the parking bar before using the products in other modes.
WARNING! The two rear parking devices located on the rear wheels are NOT TO
BE USED TO SLOW DOWN the tricycle. The rear parking devices put the tricycle in
an immediate stationary mode. The parking devices are not designed for other
purposes. Using the two rear parking devices to slow down the tricycle will
cause irreparable damage to the rear wheels' mechanism and must be
avoided at all times.
Transform Infant trike to Guided trike (A-B)
- Remove the bag by releasing the elastic loops on the top & bottom of the bag
and all Velcro straps on the parent handlebar.
- Press the red button at the bottom of the frame to remove the parent handle.
- Remove the canopy by pressing the button at the back of the headrest.
- Press the red button on the side of the middle column of the safety bar to
release; repeat for the left- and right-hand side bars.
- Under the saddle, turn the knob securing the seat 90 degrees. Lift the seat off the
saddle.
- Place
frame
- In gu
restin
See be
the pr
a. U
w
b. P
o
c. T
k
p
Transf
- Remo
all Ve
- The p
mode
the p
- When
whee
- Press
- Remo
butto
You ca
Transf
- Unsc
Trike f
onto
devic
- Put th
from
- Warn
wear
- Braki
stop
alwa
EXPLO
modu
- ON: S
- MUTE
- OFF:
Activa
• Rem
• Using
• Inser
It's ad
Charg
EXPLO
batte
Use th
Impor
- Warn
reach
- A 3.7
- Micro
- A USB
- Mod
- Batte
cord,
not b
- Toys l
befor
- Mod
- WARN
indivi
- This t
IMPOR
- WARN
- WARN
- WARN
- WARN
- WARN
- WARN
are c
- WARN
- Don'
back
vehic
- The p
- Warn
- Warn
