Idiomas disponibles
Idiomas disponibles
GENERAL PRESENTATION
1. Alarm functions
Your Beeper XRAY XR2 alarm offers you global protection for your vehicle, thanks to the various on-board functions:
•
Shock detection
•
Vehicle detection/panic mode
2. Using the remote control
Your Beeper XRAY XR2 alarm comes with two
factory
programmed
allowing you to control your alarm remotely.
#1 • DISARM
#2 • UNAVAILABLE
#3 • ARM
•
Engine start cut-off (optional)
•
Door detection (optional)
remote
controls
ON THIS MODEL
3. Coding of remote controls
Note: The remote controls are factory programmed.
Requires the connection of the white wire (+12V APC) and the blue wire
(perimetry).
To code a new remote control, please follow the following procedure:
- Open a door (if perimeter connected) or ground the BLUE wire.
- Turn the ignition key from ACC ON to ACC OFF 3 times in a row, then
stay in the ON position. The siren beeps once in response.
It is possible to pair up to 4 different remote controls. If a fifth remote
control is paired, this replaces the first paired remote control.
To deactivate an old remote control, please follow the following
procedure:
- Turn the ignition key from ACC ON to ACC OFF 6 times in succession,
then stay in the ON position. The siren beeps 6 times in response. The old
paired elements are then deleted.
16
