Meaning Of Symbols Used; When Using The Equipment - Chauvin Arnoux BC05 Manual De Instrucciones

For safety reasons, you must use only measuring leads, of
voltage and category at least equal to those of the instrument
and compliant with standard
IEC 61010.
Do not use damaged equipment.
Before use, always check all the cord insulation.
1.2.2

Meaning of symbols used:

Symbol Meaning
CAUTION -
DANGER! Refer to
the operating
manual.
The CE marking
guarantees
conformity with
European directives
and with regulations
covering EMC.
1.2.3

When using the equipment

To prevent electrical discharge, injury or damage to the device,
and to ensure you use the decade box without risk, follow the
safety recommendations below:
Read the operating instructions fully before using this
•
device and observe all safety instructions.
This device must be used indoors, up to 2,000m altitude.
•
• Always connect the box's earth terminal to an earth
protection.
Never exceed the protection limit values indicated in the
•
specifications for each type of decade.
When the decade box is inserted into a circuit, do not touch
•
the unused cords or terminals.
Every time, after use, disconnect the supplies for the
•
capacity boxes and discharge the condensers.
Avoid working alone.
•
• Use the device only as specified in this manual; otherwise,
the protection provided by this equipment may be altered.
Do not use this device if it appears damaged.
•
Inspect the integrity of lead insulation. Replace damaged
•
leads.
Be careful when working with voltages higher than 70Vdc
•
or 33Vrms and 46.7Vpp, such voltages can pose a risk of
electrocution. Depending on conditions, the use of
individual protection is recommended.
Before opening the equipment, disconnect it from all
•
circuits and cords.
14
Symbol Meaning
Ground.
Selective sorting of
waste for recycling
electrical and
electronic equipment
within the European
Union.
In accordance with
the WEEE
2002/96/EC
directive: This
equipment must not
be processed as
household waste.
BR04-05-06-07 – BC05 – BL07