3M PELTOR HT 79 Serie Manual Del Usuario página 9

(D) Compatible Industrial Safety Helmets
These earmuffs should be fitted to, and used only with, the
industrial safety helmets listed in Table D. These earmuffs
were tested in combination with the following industrial safety
helmets, and may give different levels of protection if fitted to
different helmets.
Explanation of the industrial safety helmet attachment table:
D:1 Helmet manufacturer
D:2 Helmet model
D:3 Helmet attachment
D:4 Head size: S = small, M = medium, L = large
(E) External Audio Input Levels
Table E lists the various types of PELTOR headset speakers
and the corresponding voltage level that generates a sound
pressure level of 82 dB(A) in the headset. To identify the
speaker model in your headset, remove the hygiene kit
compare the speaker to the pictures and colors described in
Table E.
E:1 Model, color ( grey black
E:2 The voltage input that generates 82 dB(A)
(F) COMPONENTS
F:1 Headband (PVC or leather)
F:2 Headband wire (stainless steel)
F:3 Two-point fasteners (POM)
F:4 Connection cord with Nexus TP-120 plug (PUR)
F:5 Speech microphone (PUR)
F:6 Ear cushion (PVC foil, PUR foam)
F:7 Push-to-talk button (only some models)
F:8 Cup
F:9 Foldable headband (stainless steel, TPE or leather)
F:10 Neckband (stainless steel, PO)
F:11 Helmet attachment (stainless steel, POM)
F:8
F:7
F:6 F:5
F:9
F:10
(G) FITTING THE HEADSET
Headband and foldable headband
G:1
blue)
G:1 Slide out the cups and tilt the top of the shell out, as the
cable must be on the outside of the headband.
G:2 Adjust the height of the cups by sliding them up or down
while holding the headband in place.
G:3 The headband should be positioned across the top of
your head as shown and should support the weight of the
headset.
Neckband
G:4
F:1
G:4 Place the cups in position over the ears.
F:2
G:5 Keep the cups in position, place the head strap on top of
your head and lock it tight in position.
G:6 The head strap should be positioned across the top of
F:3
your head and should support the weight of the headset.
Helmet attachment
G:7
F:4
G:10
3
F:11
G:2 G:3
G:5 G:6
G:9
G:8
G:11
GB