EN
English
INSTRUCTION MANUAL
Air Supply Requirements
1. Supply tool with 90 psig (6.3 bar) of clean, dry air.
Higher pressure drastically reduces tool life.
2. Connect tool to air line using pipe, hose, and
fitting sizes shown in the diagram.
3/8" (10mm)
3/8" (10mm)
Lubrication
1. Use an air line lubricator with SAE #10 oil,
adjusted to two (2) drops per minute. If an air line
lubricator cannot be used, add air motor oil to the
inlet once a day.
2. Make sure adequate lubrication is provided for
internal gears for long life.
Maintenance
1. Disassemble and inspect air motor every three
months if the tool is used every day. Replace
damaged or worn parts.
2. High wear parts are underlined in the parts list.
3. To keep downtime to a minimum, the following
service kits are recommended:
Tune-Up Kit 2050528663
(Incl: 13, 16, 20, 21, 27)
Copyright 2008, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks,
model denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or Product Liability.
1/2" (12mm)
CA048362 (1/2")
3/8" (10mm)
90
0
130
3/8" (10mm)
3/8" (10mm)
CA048360 (1/2")
CA048361 (1/2")
EC DECLARATION OF CONFORMITY
We, Chicago Pneumatic Tool Co. LLC, 13325
Carowinds Blvd., Charlotte NC, 28273 USA, declare
under our sole responsibility that the product to which
this declaration relates, is in conformity with the
requirements of the Council Directive of June 1998 on
the approximation of the laws of the Member States
relating to machinery (98/37/EC).
Machine Name RP9280-B 1/4 Inch Air Drill
Machine Type Power tool equipped with 1/4" chuck
for use with various drill bits for drilling holes - No
other use is permitted.
Serial No. Tools with No. C00501-2008 or higher
Technical Data
Free speed 2800 RPM
Air pressure 90 psi (6.3 bar)
Harmonized Standards Applied EN792-3
National Standards Applied ISO 8662-1,
Name And Position Of Issuer Bruno Blanchet,
General Manager
Signature Of Issuer
Date Of Issue June 1, 2008
Noise & Vibration Declaration*
Sound pressure level 86 dB(A),uncertainty 3 dB(A), in
accordance with ISO 15744. For sound power, add
11 dB(A).
Vibration value < 2.5 m/s , re. ISO 8662-1.
For making estimates of daily vibration exposures,
useful information may be found in CEN/TR 15350:
2006, "Mechanical vibration - Guideline for the
assessment of exposure to hand-transmitted
vibration using available information including that
provided by manufacturers of machinery"
* These declared values were obtained by laboratory
type testing in compliance with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher than the declared values. The actual exposure
values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as
well as upon the exposure time and the physical
condition of the user. We, Chicago Pneumatic,
cannot be held liable for the consequences of using
the declared values, instead of values reflecting the
actual exposure, in an individual risk assessment in
work place situation over which we have no control.
RP9280-B
Air Drill
ISO 15744
2
a
