Autoadapt Turny Evo Manual De Instalación página 36

36
Turny Evo Getting seated
Program movement path, comfort
1
2
3
4
5
Program movement path, swivel out
Switch between screen 6 and 7 to program this path.
Lengthwise/swivel
6
Gradually
swivel out
Forwards
Backwards
7
8
Confirm starting point.
Press 4 for "backwards" until the screen 2 comes up.
Correct starting position.
Use 2 and 4, "forwards" and "backwards", to run to the desired front end position.
(When screen 3 comes up it is possible to save the end position)
Press 3 to "save" and continue programming.
(Screen 4 comes up)
Use 2 and 4, "forwards" and "backwards", to run to the desired rear end position.
(When screen 5 comes up it is possible to save the end position)
Tips!
The rear end position is the starting position for "swivel out" below. Mark this
starting position with a piece of tape. This marking can be useful in the event of any
editing of the "swivel out" path.
Press 3 to "save" and continue programming.
The figure in the left corner shows how many degrees the seat is swivelled out.
The seat must be swivelled out 45 degrees before lifting is possible.
Press 1 to select in the main menu at the top.
Press 2 to activate selected direction (displayed as a large symbol to the right of the
screen).
Press 3 for "sequentially swivel out" (+1° at a time).
Press 4 to select direction "gradually swivel out", "forwards" or "backwards".
"Gradually swivel out" is a combined swivel and forward movement. We recommend
first using this swivel first to achieve a gentle, smooth movement path.
Lift
Press 1 or 3 to select the main menu at the top.
Press 2 for "down".
Press 4 for "up".
Exit
Press 1 to select in the main menu at the top.
Press 3 to save and exit from the programming mode. Turny Evo is now back in its
normal operating mode.
(Screen 6 comes up)