Assembly - Ryobi HPWB01 Manual Del Operador

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
Direct Current
No Load
n o
Speed
.../min Per Minute

ASSEMBLY

UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the

box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
Inspect the product carefully to make sure no breakage

or damage occurred during shipping.
Do not discard the packing material until you have carefully

inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call

1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-776-5191 for assistance.
OPERATION
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes resulting in possible serious injury.
DESIGNATION/EXPLANATION
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
5 – English
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this blower.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
INSTALLING THE BLOWER NOZZLE
See Figure 1, page 9.
Align the tabs inside the nozzle with the slots on the

blower outlet.
Push the nozzle onto the blower outlet until it stops.

While gripping the plastic ring, turn the nozzle clockwise

until it is securely attached.
To remove the nozzle, turn it counterclockwise until it

stops and slide the nozzle off.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury
APPLICATIONS
You may use this product for the purposes listed below:
 Keeping jobsite area free from residual dust and other
light debris