Manuales relacionados para Westinghouse ETL-ES-Brinley-WH23
Resumen de contenidos para Westinghouse ETL-ES-Brinley-WH23
- Página 1 ETL-ES-Brinley-WH23 OWNER'S MANUAL MANUAL DEL USUARIO Brinley Please write model number here for future reference: Por favor, incluya el número del modelo aquí para futura referencia: Net Weight: 13.73 LBS Peso Neto: 6.23 KGS...
- Página 2 ETL-ES-Brinley-WH23 SAFETY TIPS OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED ' A CCEPTABLE FOR FAN SUPPORT OF 35 LBS (15.9 KG) OR LESS' AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE.
- Página 3 ETL-ES-Brinley-WH23 CONSEJOS DE SEGURIDAD HAGA LO SIGUIENTE: LEA Y GUARDE ESTAS INSTRUCCIONES ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA O HERIDAS PERSONALES, MONTE EN UNA CAJA DE EMBUTIR ROTULADA “ADECUADA PARA VENTILADORES DE 35 LB (15,9 KGS ) O MENOS”...
- Página 4 ETL-ES-Brinley-WH23 FEATURES CARACTERÍSTICAS DOWNROD INSTALLATION INSTALACIÓN CON VARILLA VERTICAL For normal ceilings COMBO-BLADE Combo-Blades feature two high quality finishes on one blade. Select the one that best complements Para techos normales your decor, or change the style with just a flip of the blade.
- Página 5 ETL-ES-Brinley-WH23 PREPARING FOR INSTALLATION ANTES DE LA INSTALACIÓN Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble).
- Página 6 ETL-ES-Brinley-WH23 MOUNTING BRACKET INSTALLATION INSTALACIÓN CON SOPORTE DE MONTAJE Loosen but don’t remove the screws at the bottom of canopy; remove the mounting bracket from the canopy. Afloje pero no quite los tornillos en la parte inferior del dosel; extraiga el soporte de montaje del dosel.
- Página 7 ETL-ES-Brinley-WH23 MOUNTING OPTIONS MOUNTING BRACKET INSTALLATION INSTALACIÓN CON SOPORTE DE MONTAJE OPCIONES DE MONTAJE Choose a MOUNTING OPTION Elija una OPCIÓN DE MONTAJE EXTENDED DOWNROD OPTION Extension Down Rods sold separately If installing with longer downrod than supplied with fan, proceed to page 8, step 6.
- Página 8 ETL-ES-Brinley-WH23 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA Loosen the downrod ball (1) from downrod (2) by removing the screw (3). Slide downrod ball (1) off of downrod and remove pin (4). Afloje la bola de la varilla vertical (1) de la varilla vertical (2) quitando el tornillo de fijacion (3). Deslice la bola de la varilla vertical (1) hasta separarla de la varilla vertical y...
- Página 9 ETL-ES-Brinley-WH23 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA Re-install pin into downrod, and slide downrod ball up to the top of the downrod. Re-install the screw to secure ball to downrod. Note: Some extended downrods have a pre-drilled set-screw hole. If a pre-drilled hole is present in the extended downrod, tighten the set screw into the pre-drilled hole in the extended sownrod. If no pre- drilled hole exists in the extended downrod, tighten the screw against the downrod to secure the downrod ball.
- Página 10 ETL-ES-Brinley-WH23 DOWNROD PREPARATION PREPARANDO LA VARILLA VERTICAL Remove clamp pin (1) and cross pin (2) from downrod (3). Quite el pasador tipo prensa (1) desde el pasador transversal (2) de la varilla vertical (3).
- Página 11 ETL-ES-Brinley-WH23 NORMAL DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL NORMAL Place downrod assembly into canopy (1), canopy cover ring (2) and coupling cover (3). Feed motor wires through the downrod assembly. Coloque el conjunto de la varilla vertical (1) dentro del dosel (1), el anillo de la cubierta del dosel (2) y la cubierta del acoplamiento (3). Pase los cables del motor a través del conjunto de la...
- Página 12 ETL-ES-Brinley-WH23 NORMAL DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL NORMAL Loosen set screws in downrod coupling (1). Insert downrod into downrod coupling. Make sure to align hole in downrod with the hole in coupling. Install yoke cross pin (2) through yoke and downrod. Insert clamp pin (3) into cross pin until it snaps into place.
- Página 13 ETL-ES-Brinley-WH23 BLADE INSTALLATION LIGHT FIXTURE INSTALLATION INSTALACIÓN DE LAS ALETAS INSTALACIÓN DEL JUEGO DE LUZ Insert the blades through the slots on the flywheel, tighten the blades to the pre- Remove one (1) of the 4 screws on the support plate (3), and loosen (do not installed blade bracket by the provided screws and flat washers.
- Página 14 ETL-ES-Brinley-WH23 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ Carefully insert lead wires through the centre hole of the converting plate (1). The converting plate has 3 keyhole slots, align the slots to the protruding screws from support plate (2). Attach and rotate the converting plate clockwise to engage the key-slots.
- Página 15 ETL-ES-Brinley-WH23 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ Remove the 4 screws from 4 threaded stand-offs of the converting plate and keep them for use in the next step. Align the wire plugs from the converting plate and from the motor and slide together.
- Página 16 ETL-ES-Brinley-WH23 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ Find the single pin from the light kit and from the converting plate for connection, the wire with the tag that says FOR light kit connection, white and white and black and black. There are 4 holes around the lamp holder from the light kit.
- Página 17 ETL-ES-Brinley-WH23 MOUNTING MONTAJE Carefully lift fan assembly onto mounting bracket. Rotate fan until notch on downrod ball (1) engages the ridge on the mounting bracket (2). This will allow for hands free wiring. With bracket holding fan assembly, make electrical connections using the Levante con cuidado el conjunto del ventilador hasta el soporte de montaje.
- Página 18 ETL-ES-Brinley-WH23 WIRING OPTIONS OPCIÓN DE CABLEADO PULL CHAIN WIRING OPTION WALL CONTROL WIRING OPTION AC IN N AC IN N Green Ground Green Ground Power Power Supply Supply AC IN L AC IN L Wall Wall Switch Control Follow diagram above to make wiring connections for wall control operation.
- Página 19 ETL-ES-Brinley-WH23 SECURE TO CEILING ASEGURE EL VENTILADOR AL TECHO Raise the canopy up and align the keyholes on the bottom of the canopy with the 2 screws on the bottom of mounting bracket. Rotate the canopy until both screws from the mounting bracket drop into the slot recesses. Tighten screws securely.
- Página 20 ETL-ES-Brinley-WH23 The inside canopy cover ring (1) has two keyhole slots that allow it to be mounted onto the screw heads on the two protruding screws from the mounting bracket. Slide the canopy cover ring up the downrod, and allow the two protruding screw heads from the mounting bracket to go into the keyhole slots on the canopy cover ring. Once engaged, twist the canopy cover ring to lock it onto the screw heads.
- Página 21 ETL-ES-Brinley-WH23 LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL JUEGO DE LUZ Assemble decorative fob and extension chains from hard- Locate the indentations on the neck of the glass and align with ware bag to fan pull chains by inserting end of chain into the protrusions on the inside of the light kit.
- Página 22 ETL-ES-Brinley-WH23 OPERATION AND MAINTENANCE Operation Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse.
- Página 23 ETL-ES-Brinley-WH23 OPERACIÓN Y MANTENIMIENTO Operación Encienda el ventilador y verifique su funcionamiento. La cadenilla de tiro controla las velocidades del ventilador de la siguiente manera: 1 jalón – rápida; 2 jalones - mediana; 3 jalones - lenta; 4 jalones - apagado.
- Página 24 ETL-ES-Brinley-WH23 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TROUBLESHOOTING GUIDE installation errors may be mistaken for defects. If you experience any faults, please check this troubleshooting chart. If a problem cannot be remedied, please consult with your qualified electrician and do not attempt any electrical repairs yourself.
- Página 25 ETL-ES-Brinley-WH23 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación o cableado incorrectos. En algunos GUÍA PARA SOLUCIONAR PROBLEMAS casos, estos errores de instalación podrían ser confundidos con defectos. Si experienca algun fallo, consulte esta guía para solucionar problemas.
- Página 26 If replacement product is not available through seller, please contact www.westinghouselighting.com/contact-us. GARANTÍA Este ventilador de Westinghouse Lighting se ofrece con una garantía limitada de por vida para el propietario original frente a defectos de material y de mano de obra. Esta garantía sustituye cualquier otra garantía expresa o implícita.
- Página 27 ETL-ES-Brinley-WH23 PARTS LIST LISTA DE REPUESTOS Description 1 ..... . Mounting Bracket 2 ..... . Blade 3 .
- Página 28 ETL-ES-Brinley-WH23 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com and Westinghouse are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Lighting. All Rights Reserved. Made in China...