Manuales relacionados para Westinghouse ETL-ES-Sumter-WH15
Resumen de contenidos para Westinghouse ETL-ES-Sumter-WH15
- Página 1 ETL-ES-Sumter-WH15 OWNEr'S MaNuaL MaNuaL dEL uSuariO Sumter Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: Net Weight: 16.5 LBS Peso Neto: 7.5 KGS...
- Página 2 ETL-ES-Sumter-WH15 SafETy TiPS OBSErVE THE fOLLOWiNG: rEad aNd SaVE THESE iNSTruCTiONS WarNiNG: TO rEduCE THE riSK Of firE, ELECTriC SHOCK, Or PErSONaL iNJury, MOuNT TO OuTLET BOX MarKEd 'aCCEPTaBLE fOr faN SuPPOrT Of 15.9 KG (35 LBS) Or LESS' aNd uSE MOuNTiNG SCrEWS PrOVidEd WiTH THE OuTLET BOX aNd/Or SuPPOrT dirECTLy frOM BuiLdiNG STruCTurE.
- Página 3 ETL-ES-Sumter-WH15 CONSEJOS dE SEGuridad HaGa LO SiGuiENTE: LEa y GuardE ESTaS iNSTruCCiONES adVErTENCia: Para rEduCir EL riESGO dE iNCENdiO, dESCarGa ELÉCTriCa O HEridaS GraVES PErSONaLES, MONTE EN uNa CaJa dE EMBuTir rOTuLada “adECuada Para VENTiLadOrES dE 15,9 KG (35 LB) O MENOS” uTiLiZaNdO LOS TOrNiLLOS dE MONTaJE iNCLuidOS CON La CaJa dE EMBuTir y/O MONTE dirECTaMENTE EN La ESTruCTura dEL EdifiCiO La MayOrÍa dE LaS CaJaS dE EMBuTir uTiLiZadaS .NOrMaLMENTE CON arTEfaCTOS dE iLuMiNaCiÓN NO SON adECuadaS Para VENTiLadOrES y dEBErÍaN SEr rEEMPLaZadaS.
- Página 4 ETL-ES-Sumter-WH15 fEaTurES CaraCTErÍSTiCaS COMBO-BLADE Combo-Blades feature two high quality finishes on one blade. Select the one that best complements your decor, or change the style with just a flip of the blade. NOTE: Combo-Blade finishes vary, depending upon model. ASPAS DE DOBLE CARA Las aspas del rotor de doble cara presentan dos superficies con un acabado de alta calidad.
- Página 5 ETL-ES-Sumter-WH15 PrEPariNG fOr iNSTaLLaTiON aNTES dE La iNSTaLaCiÓN Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble).
- Página 6 ETL-ES-Sumter-WH15 MOuNTiNG BraCKET iNSTaLLaTiON iNSTaLaCiÓN CON SOPOrTE dE MONTaJE Remove the screws and star washers (1) from the bracket as shown above. Loosen (do not remove) the screws (2) from the bracket as shown above. Install mounting bracket to outlet box in ceiling using the screws and washers Remove screws from motor bracket and mounting plate.
- Página 7 ETL-ES-Sumter-WH15 MOuNTiNG MONTaJE While fan is hanging from the mounting plate, connect the wires with wire connectors (included), using the following steps for wiring options. Mientras el ventilador está colgado de la placa de montaje, conecte los cables con los conectores para cables (incluidos)
- Página 8 ETL-ES-Sumter-WH15 WiriNG OPTiONS OPCiÓN dE CaBLEadO WaLL CONTrOL WiriNG OPTiON PuLL CHaiN WiriNG OPTiON Follow diagram above to make wiring connections for fan pull chain control. Follow diagram above to make wiring connections for wall control operation. OPCiÓN dE CaBLEadO Para CadENiLLa dE TirO OPCiÓN dE CaBLEadO Para CONTrOL dE ParEd...
- Página 9 ETL-ES-Sumter-WH15 MOuNTiNG MONTaJE The decorative motor housing has two mating slots (1) and two mating holes (2). Position both slots on the motor housing directly under and in line with two screws in the mounting bracket (3). Lift the motor housing, allowing the two screws to slide into the Install two screws and star washers into the mating holes mating slots.
- Página 10 ETL-ES-Sumter-WH15 BLadE iNSTaLLaTiON iNSTaLaCiÓN dE LaS PaLETaS Check the motor for plastic shipping stabilizer tabs (1), and remove them if they are present. Attach blade assembly to motor using the noise-dampening motor gaskets (2) and motor screws provided. Tighten screws ecurely. NOTE: Some models do not utilize motor gaskets, Attach blade brackets to blades using the blade bracket screws (1), metal washers, or stabilizer tabs.
- Página 11 ETL-ES-Sumter-WH15 LiGHT fiXTurE iNSTaLLaTiON iNSTaLaCiÓN dEL arTEfaCTO LuMiNOSO Remove the 3 attachment screws from the light kit cap, keep them for next step. Find the wire plugs from the light kit and from the motor and slide together. Connect the blue wire from the switch housing, to the black wire from the light kit, and the white wire from the switch housing to the white wire from the light kit.
- Página 12 ETL-ES-Sumter-WH15 Install the glass (5) onto the light kit and tighten the washer (4) and nut (3) onto the bottom of glass. Make sure the ceiling fan pull chain is threaded through the side hole in the bottom of the glass. Place decorative cap (2) over the bottom of glass and secure by tightening decorative finial (1).
- Página 13 ETL-ES-Sumter-WH15 Assemble decorative fob and extension chains from hardware bag to fan pull chains by inserting end of chain into chain coupling. Confirm chains are held by lightly pulling both chains in coupling. Sujetar las cadenas largas de tiro con las piezas finales correspondientes, a las cadenas del ventilador, introduciendo el extremo de la cadena larga en la pieza de unión. Asegúrese de que las...
- Página 14 ETL-ES-Sumter-WH15 OPEraTiON aNd MaiNTENaNCE Operation Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse.
- Página 15 ETL-ES-Sumter-WH15 OPEraCiÓN y MaNTENiMiENTO Operación Encienda el ventilador y verifique su funcionamiento. La cadenilla de tiro controla las velocidades del ventilador de la siguiente manera: 1 jalón – rápida; 2 jalones - mediana; 3 jalones - lenta; 4 jalones - apagado.
- Página 16 ETL-ES-Sumter-WH15 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TrOuBLESHOOTiNG GuidE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.
- Página 17 ETL-ES-Sumter-WH15 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación o cableado incorrectos. En algunos casos, estos errores de instalación podrían ser confundidos con defectos. Si experimenta alguna falla, consulte esta guía para solucionar problemas. Si no puede solucionar el problema, consulte a un electricista autorizado y no intente reparar conexiones eléctricas.
- Página 18 ETL-ES-Sumter-WH15...
- Página 19 ETL-ES-Sumter-WH15...
- Página 20 ETL-ES-Sumter-WH15 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com , WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation Used under license by Westinghouse Lighting All rights reserved. Made in China...