Ordering Replacement Parts; Disposal And Recycling - EINHELL RG-EL 2700 E Manual De Instrucciones

agents or liquids for cleaning purposes. Remove
deposits with a brush, a dry cloth or compressed
air. When you fit the cover, make sure that the nib
at the bottom end of the cover (Fig. 8b / Item A) is
inserted into the corresponding recess in the
housing (Fig. 8b / item B).
Important: If the cover is not correctly closed,
a microswitch will interrupt the power supply
and the equipment cannot operate properly.
For this reason, always check that the cover
is properly fitted and secured.
9.2 Maintenance
Should the tool experience problems beyond
n
those mentioned above, let only an authorized
professional or a customer service shop perform
an inspection.
There are no parts inside the equipment which
n
require additional maintenance.

9.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
n
Article number of the machine
n
Identification number of the machine
n
Replacement part number of the part required
n
For our latest prices and information please go to
www.isc-gmbh.info
10. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.

11. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
17