Idiomas disponibles
Idiomas disponibles
ENGLISH
1 DESCRIPTION
The device Ref. 1060/13 is an Elekta call module for Ipercom serverless system.
The main features are:
•
Signal management using 3.5" graphic colour display and evolved graphic user interface (GUI).
•
Simultaneous lock with pulse capacitance discharge (SE+; SE-) and no-voltage contact relay (C-NC-
NO) operation.
•
Garage gate lock low current operation (SE2).
•
Hall button input.
•
Door sensor input.
•
Audio repeat device control for use with hearing aid.
•
LAN connection with RJ45 connector and POE power.
•
Set-up by means of 2 terminals for local power supply.
•
125 kHz integrated transponder key reader (Ref. 1125/50).
•
Infrared proximity sensor for user detection.
•
CCD colour camera with wide-angle lens.
•
Alphanumeric keypad with 18 buttons, three of which multifunctional.
•
Black glass design.
2 INSTALLATION
•
Arrange wire conduits in order that they end in the lower holes of the fl ush mounting box.
•
Fix the fl ush mounting box Ref. 1145/53 at the height shown.
•
Fix the magnet (tamper) at the indicated height with the two-sided adhesive tape included
•
Make electric connections.
•
Fix the call module to the fl ush mounting box.
•
Fix the front panel to the call module.
The highlighted part of the magnet must face the wall of the box (in contact with the two-sided
adhesive tape).
6
TAMPER
DS1060-117A
