Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
WARNING
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
modification is misuse and could result in a hazardous condition leading to possible serious
injury.
WARNING
assembling parts.
This cordless drill/driver must be used only with the battery packs and charger listed
below:
Battery Pack
2Ah
SKIL BY500101
SKIL BY519901
NOTICE: Please refer to the battery and charger manual for detailed operating information.
To Attach/Detach Battery Pack
Lock the trigger switch "OFF" on the tool by
placing the direction-of-rotation (forward/
center-lock/reverse) selector in the center
position.
a. To attach the battery pack:
Align the raised rib on the battery pack with
the grooves of the tool, and then slide the
battery pack onto the tool (Fig.2).
CAUTION
sure that the raised rib on the battery pack
aligns with the groove inside the tool and
that the latches snap into place properly.
Improper attachment of the battery pack
can cause damage to internal components.
To reduce the risk of fire, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
Do not attempt to modify this drill/driver or create accessories not
recommended for use with this drill/driver. Any such alteration or
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the drill/driver when
4Ah
SKIL BY519801
When placing the battery
pack onto the tool, be
Charger
SKIL QC535701
SKIL SC536501
Fig. 2
Attach
Battery-
Release
Button
Detach
11
