Idiomas disponibles
Idiomas disponibles
Maintenance
Troubleshooting
Replacing the oven lights
Oven lights (2 Locations)
There are 2 oven lights, one on each side oven wall. To replace a light, follow these
steps :
CAUTION
To prevent electric shock, make sure the gas oven is power off and cool before
replacing the oven light.
NOTE
•
The oven lights do not operate during a self-cleaning cycle.
•
Remove the racks if they prevent you from accessing an oven light.
44 English
DOP36P86GLS_DG68-01105D-00_EN+MES+CFR.indb 44
1.
Hold the lower end of the side oven
light cover with one hand, and then use
a flat-sharp tool such as a table knife to
remove the cover as shown.
2.
Replace the side oven light.
3.
Reinsert the light cover.
Troubleshooting
Troubleshooting
If you run into unexpected trouble, look first for a solution in the tables below.
If you're still having trouble after trying the suggested solution, call 833-35-ELITE
(833-353-5483).
Gas safety
Problem
Possible cause
The surface burner knob is
not in the OFF position and
the burner is not lit.
You smell gas.
There is a gas leak.
Surface burner
Problem
Possible cause
The power cord is not
plugged into the electrical
outlet.
A fuse in your home may
All burners do not
be blown or the circuit
light.
breaker may have tripped.
The gas supply is not
properly connected or
turned on.
Solution
Turn the burner knob to OFF.
Clear the room, building, or area of all
occupants. Immediately call your gas
supplier from a neighbor's phone. Do
not call from your phone. It is electrical
and could cause a spark that could
ignite the gas. Follow the gas supplier's
instructions. If you cannot reach your
gas supplier, call the fire department.
Solution
Make sure the electrical plug is
plugged into a live, properly grounded
outlet.
Replace the fuse or reset the circuit
breaker.
See the Installation instructions that
came with your range.
2020-07-06 오후 4:27:17
