CLEaning tHE Button trap
The Button Trap is designed to capture small loose items such as buttons and coins,
and prevent them from damaging your machine.
1. Press down on the release latch to hinge forward the access panel.
2. Turn the trap counterclockwise to unlock and remove. Remove debris from the
trap and rinse clean.
3. Reinsert the trap and turn clockwise to lock in place. Close the access panel.
notE: A small amount of water will drain from the trap. Use a shallow pan or place a
towel on the floor before removing the Button Trap.
notE: The button trap should be cleaned once a year.
Take care when reinserting the trap. Make sure it is properly seated and locked
in place to avoid potential leaks.
VaCationing prECautions
• Unplug the electrical cord from the wall outlet.
• Turn off the water supply faucets. This will eliminate the potential for water
damage if the hoses accidentally rupture or become loose.
• Dry the wash drum and leave the door open so moisture can evaporate to prevent
the growth of mold and mildew.
Caution
27