Idiomas disponibles
Idiomas disponibles
Code
Inverter Communication problem
AC6
•
•
Operating the washer with the door open.
dC
•
•
High temperature heating check.
HC
•
Check the drain hose.
•
•
•
LC
When the washer displays "LC", the washer do draining for 3 minutes. During
this time, the POWER button is inoperative.
Water is overflowed.
•
OC
•
When position of the clutch can't be detected.
PC
•
After position of the clutch is detected, if the signal of the clutch hall goes
PC1
wrong.
•
Spinning does not work.
•
•
Ub
•
WA3400T_DC68-03850E-04_EN.indd 55
WA3400T_DC68-03850E-04_EN.indd 55
Check the Inverter PCB and wire harness.
If the information code remains, contact a customer service centre.
Make sure the door is properly closed.
Make sure laundry is not caught in the door.
If the information code remains, contact a customer service centre.
Make sure the end of the drain hose is placed on the floor.
Make sure the drain hose is not clogged.
If the information code remains, contact a customer service centre.
NOTE
Restart after spinning.
If the information code remains on the display, contact a local Samsung
service centre.
If the information code remains, contact a customer service centre.
If the information code remains, contact a customer service centre.
Make sure laundry is spread out evenly.
Make sure the washing machine is on a flat, stable surface.
Redistribute the load. If only one item of clothing needs washing, such as
a bathrobe or pair of jeans, the final spin result might be unsatisfactory,
and an "Ub" check message will be shown in the display.
Meaning
English 55
2022-06-30
2022-06-30
12:13:31
12:13:31
