JMA CAPRI SMART Manual De Instrucciones página 10

1.- PRESENTATION AND GENERAL ASPECTS
1.1 GENERALITIES
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. - CHARACTERISTICS OF THE MACHINE
2.1 KEY FAMILIES
2.2 ACCESSORIES
2.3 TOOLBOX (OPTIONAL)
2.4 ELECTRICAL CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGE OF THE CUTTER AND TRACER (19)
2.7.2 BLOCKAGE OF CARRIAGE AT THE END OF ITS RUN "Y" AXIS
2.7.3 JAW(6)
2.7.4 TRACER SPRING-LOAD (11)
2.7.5 SPRING LOADING AND BLOCKING OF THE CARRIAGE ON AXIS "X" (5 AND 4)
2.7.6 MAINS SWITCH AND MOTOR SWITCH (15 AND 16)
2.7.7 SCREEN-KEYBOARD (1)
2.7.8 VERTICAL REGULATION OF THE TRACER (14)
3.- ENCRYPTION
3.1 ENCRYPTION PROCESS
3.2 ENCRYPTION OF KEYS WITH STANDARD JAW
3.2.1 SEA-1 KEY
3.2.2 OP-WH.P AND OP-WY.P KEYS
3.2.3 ME-3.P AND ME-4.P
3.2.4 JIS-4.P KEY
3.2.5 FO-6.P KEY
3.2.6 MCM-10 KEY
3.2.7 TE-T60 AND TE-T80 KEYS
3.3 ENCRYPTION OF KEYS WITH OPTIONAL TUBULAR JAW
3.3.1 TUBULAR KEYS
3.3.2 FIC-2 AND RC-3 KEYS
3.3.3 WIN-1D, WIN-2D, WIN-3D AND WIN-4D KEYS
4.- MAINTENANCE
4.1 REPLACEMENT OF THE JAW CHUCK
4.2 ADJUSTMENT OF THE CHUCKS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACEMENT OF FUSES
4.4 TENSING AND REPLACEMENT OF THE BELT
4.5 REPLACEMENT OF THE MOTOR
4.6 REPLACEMENT OF THE SCREEN-KEYBOARD
4.7 REPLACEMENT OF THE ELECTRONIC CONTROL BOARD
5.- SAFETY
6.- ELIMINATION OF RESIDUES
6.1 PACKING
6.5 SWARF
6.3 MACHINE
7.- ADAPTOR-INCLINATION-TRACER-CUTTER-KEY TABLE
8.- EXPLODED DIAGRAM