Idiomas disponibles
Idiomas disponibles
cleaning washable parts, fully dry the parts before reinstalling and using them.
Make sure the robot vacuum is turned off when being transported and kept in its original packaging if
•
possible.
Please use this product in accordance with the instructions in the user manual. Users are responsible for
•
any loss or damage arising from improper use of this product.
Batteries and Charging
WARNINGS:
Do not use any third-party battery, power cord, or auto-empty station. The robot vacuum can only be used
•
with model JCZ2201 auto-empty station.
No action needed from users to shift the auto-empty station between 50 Hz and 60 Hz, and the product
•
can adapt itself for both 50 Hz and 60 Hz.
Do not dismantle, repair, or modify the battery or the auto-empty station on your own.
•
Do not place the auto-empty station near heat sources.
•
Do not use a wet cloth or wet hands to wipe or clean the charging contacts of the auto-empty station.
•
Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an appropriate
•
recycling facility.
If the robot vacuum won't be used for an extended period, fully charge it, then turn it off and store in a
•
3
cool, dry place. Recharge the robot vacuum at least once every 3 months to avoid over-discharging the
battery.
The lithium-ion battery pack contains substances that are hazardous to the environment. Before disposing
•
of the robot vacuum, please first remove the battery pack, then discard, or recycle it in accordance with
local laws and regulations of the country or region it is used in.
When removing the batteries from the product, it is better to use up the batteries and make sure your
•
product is disconnected from power.
1). Uninstall the screw on the bottom, then remove the cover.
2). Unplug the battery connector, then remove the batteries. Do not damage the battery case to avoid any
risk of injuries.
3). Return the batteries to a professional recycling organization.
Laser Safety Information
The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class 1 laser products. Please
•
avoid direct eye contact with it during use.
EU Declaration of Conformity
Hereby, Dreame (Tianjin) Information Technology Co., Ltd. declares that the radio equipment type B102GL is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
For detailed e-manual, please go to www.mi.com/global/service/userguide
4
