Configuring The Gps - Uniden UM425 Manual Del Usuario

Installing the Hardware
When the GPS receiver is correctly connected, the display shows GPS Data
OK. If there is a problem with the GPS connection, the display shows Check
GPS. When the display shows GPS Data OK, press the
button to open the GPS status screen and see detailed GPS data:
Date
Course
Latitude
Longitude

Configuring the GPS

If the radio is receiving valid GPS data, it will automatically set the clock to
your local time based on the GPS location. You can adjust your local time
forward or back one hour if necessary (for example, if you are close to the
border of a time zone); you can also adjust for Daylight Savings Time.
Follow the steps below to adjust the time:
MENU
1. Display the menu and choose the Setup sub-menu.
2. Select GPS Setup and then choose Time Adjust.
3. The display shows your current local time. To adjust the time forward
one hour, use the
use the
you are finished.
The display prompts you to confirm the setting: choose Set to save the
4.
new time or Cancel to exit time setup without saving. The radio returns
to the GPS Setup menu.
5. If your local area observes Daylight Savings Time, highlight Daylight
Save and press the
06/20 11:00:00
o
208 30. 0 KT
o
35 40. 610 N
o
139 46. 564 E
Setup
GPS Setup
SELECT
SELECT
CHANNEL UP
CHANNEL DOWN
SELECT-1W/25W
Time
16
Time Adjust
SELECT
button. To adjust the time back one hour,
button. Press the
button.
E-48
SELECT-1W/25W
Current
channel
Speed
Time Adjust
09 : 14
Use the up or down
arrows to adjust the
time by one hour.
button when
SELECT-1W/25W
16