BFT SP 3500 Instrucciones De Uso página 16

x2
***
0--- 10--
ALT follow the user guide
language
Control unit software version
stat OK
vers
- +
No total
manoeuvres (in hundreds)
OK
n. cycles
- +
List of last 30 errors
err OK
0---
password
16 -
SP 3500
ACCESS MENUS Fig. 1
150- 1520
See PARAMETERS MENU
See LOGIC MENU
Diagnostics
code
START E external start input activated
STRE
START I internal start input activated
STRI
OPEN input activated
OPEN
CLOSE input activated
CLS
PED pedestrian input activated
PED
TIMER input activated
TIME
STOP input activated
STOP
PHOT photocell input activated
PHOT
PHOT OP opening photocell input activated
PHOP
PHOT CL closing photocell input activated
PHCL
BAR safety edge input activated
BAR
BAR safety edge input activated on slave motor
BAR 2
(opposite leaves connection)
SWC motor closing limit switch input activated
SWC
SWO motor opening limit switch input activated
SWO
Mechanical release activated
rls
Photocell test failed
ER01
Safety edge test failed
ER02
bft . . .
+/-
Opening photocell test failed
ER03
Closing photocell test failed
ER04
0000
+/-
8k2 safety edge test failed
er06
01.33
Board hardware test error
ER1x
*
02.01
Thermal cutout
ER4x
*
........
Internal system supervision control error.
ER7x *
30.15
+/-
*X= 0, 1, .., 9, A, B, C, D, E, F
10--
ok
DESCRIPTION
150- 1520
*** Password entry.
Request with Protection Level
logic set to 1, 2, 3, 4
Scroll up
Scroll down
Con rm/Switch on display
Exit Menù
NOTES
Check position of release
Check photocell connection and/or logic settings
Check safety edge connection and/or logic settings
Check photocell connection and/or param-
eter/logic setting
Check photocell connection and/or param-
eter/logic setting
Check safety edge connection and/or
parameter/logic settings
- Check connections to motor
- Hardware problems with board (contact
technical assistance)
Allow automated device to cool
Try switching the board off and back on
again. If the problem persists, contact the
technical assistance department.
prg