Idiomas disponibles
Idiomas disponibles
EN
1 - GETTING THE MACHINE READY FOR USE
For first use, or if the machine has not been used for a long time, the internal components should be rinsed through by cleaning the water tank and dispensing at least 3 mugs of
water. The instructions below show how to do this.
To remove the water tank, push it downwards.
Plug in the machine.
14
1
Rotate the tank outward.
5
Switch the power button to "I" to turn on the
machine.
2
Fill the tank with fresh water up to the maximum
level.
6
Open the Capsule Compartment Cover by lifting
the Cover Lever upwards. Make sure there is no
capsule inside.
3
Refit the water tank by inserting the tabs on
the bottom into the slots on the machine then
pushing the water tank downwards and towards
the machine until it locks into place
7
The
and
buttons start flashing.
4
8
Capítulos
