Rinsing The Machine/Inner Circuits - illy Y3 IPERESPRESSO Instrucciones De Uso

Rinsing the machine/inner circuits

When used for the first time, or if the machine has been turned off for a prolonged
period, it is advisable to make at least three cups of hot water, to rinse out the
machine's internal circuits, using the following procedure.
• Ensure that there are no capsules inside; power on the machine via the main
switch(on the back) (9)
• Place a large empty cup under the coffee spout.(Fig. 5)
When the buttons (A) and (B) appear with a fixed light the machine is ready
for use. Press a button (A) or (B); the machine dispenses water, press the
button again when you have obtained the desired amount of water (Fig. 6).
The machine has been rinsed once at least three cups of water have
been made.
NOTE
To make an espresso using button (A) (small cup), place the rack (11) as in
Fig.6. When tall cups are needed, place the rack (11) as in Fig.5, and place
the cup directly on the rack (5) (Fig.5)
21
Fig. 5
Fig. 6
EN