Idiomas disponibles
Idiomas disponibles
Insert the red and white cinch plugs at the other end of the cable into the corre-
sponding colour-coded output sockets on the audio output device.
Devices such as stereo receivers or televisions usually have one red and
one white audio output socket. These are usually marked as OUT, AU-
DIO OUT, LINE OUT or similar.
Please also note the information in the user manual for your audio out-
put device.
.. Connecting external devices via the optical con-
nection
...
Optical connection
You can connect digital amplifiers or televisions with an optical digital output to the
soundbar via the OPTICAL
Remove the cover cap from the OPTICAL connection on the soundbar.
Plug the optical digital cable connector into the OPTICAL connection on the
soundbar.
Plug the other optical digital cable connector into the corresponding digital out-
put socket on your audio output device.
If an audio sound is not emitted, switch the audio output format on your
audio output device to PCM (Pulse Code Modulation) mode.
.. Important notes about HDMI ARC
...
HDMI ARC (Audio Return Channel)
Since the HDMI . standard, significantly higher bandwidths and speeds have been
possible with ARC for audio and video transmission.
In order to use HDMI ARC functions, all components connected must support HDMI
ARC. In addition, you will need a HDMI cable that supports the ARC or HDMI .
standard. This cable is usually marked with the addition "Ultra High Speed".
.. Connecting TV via HDMI ARC
Proceed as follows to connect your television to the soundbar via HDMI ARC:
Switch off the television and the soundbar.
Connect the HDMI cable to the HDMI ARC
Connect the other end of the HDMI cable to the HDMI IN (ARC) port on your
television.
Enable the ARC and CEC functions on your television and set the audio output
format to PCM (Pulse Code Modulation).
connection. You will need a digital optical cable.
port on the soundbar.
