Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
1.Gas Strip Nailer
Dimensions
Length × Height × Width
Weight
Nail capacity
Cycle rate
Battery
Fuel Cell
2. Battery Charger (UC7SD)
Input power source
Charging time
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
NAIL SELECTION
WARNING
Be sure to use only the genuine HITACHI nails for
the NR90GC. The use of any other nails can result
in tool malfunction and/or nail breakdown,
leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
Paper collated strip nails
Clipped-head nails
* This Nailer is not recommended for use with from 3" to
3-1/2" ring shank nails in pressured-treated lumber.
Min.
Max.
.266"
.303"
(6.8 mm)
(7.7 mm)
.120"
.131"
(3.0 mm)
(3.3 mm)
13-21/32" × 13-29/32" × 4-1/4"
(347 mm × 353 mm × 108 mm)
7.7 lbs. (3.5 kg)
37 nails (1 strip)
Intermittent: 2 – 3 nails per second
Continuous: 1,000 nails per hour
EB714S (1.4 Ah)
Ni-Cd battery, 7.2 V
Type No. 728-980 ...... sold separately
Single phase: AC120V 60Hz
Approx. 60 min.
(At a temperature of 70°F (20°C))
DC 7.2 V
DC 1.6 A
2.4 lbs. (1.1 kg)
ACCESSORIES
Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
2
OPTIONAL ACCESSORIES
sold separately
Fuel Cell
Gas Strip Nailer Lubricant
8 oz. (250 cc) oil feeder
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
— 11 —
DANGER
1 Safety glasses ............................... 1
2 Battery ........................................... 1
3 Charger ......................................... 1
4 Case ............................................... 1
5 Allen wrench for M5 screw ......... 1
3
4
Code No. 752-600
(Code No. 885-246)
English
5
