Samsung 7 Serie Manual Del Usuario página 20

Basic Features
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format: During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay : Correct audio-video mismatch, when
■
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setting the Time
¦
O
MENU m → Setup → Time → ENTERE
Time
Clock : Setting the clock is for using various timer
■
features of the TV.
O
The current time will appear every time you press
the INFO button.
✎
If you disconnect the power cord, you have to set
the clock again.
✎
You can set the
Minute directly by pressing the number buttons
on the remote control.
Using the Sleep Timer
¦
O
m → Setup → Time → Sleep Timer →
MENU
ENTERE
t
Sleep Timer
■
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
To cancel the
20
English
BN68-02948A-ENG.indb 20
Setup Menu
Month, Day, Year, Hour and
: Automatically shuts off the TV
Sleep Timer, select Off.
Setting the On/Off Time
¦
O
m → Setup → Time → Timer 1 → ENTERE
MENU
Timer 1 / Timer 2 / Timer 3
■
timer settings can be made. You must set the clock first.
Timer 1
On Time
▲
Inactivate 12
▼
Off Time
Inactivate 12
Volume Source Antenna
10 TV
Repeat
Sun Mon Tue Wed Thu
Once
L Move U Adjust E Enter R Return
On Time / Off Time: Set the hour, minute, am/pm
and activate / inactivate. (To activate the timer with the
setting you have chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select the TV or USB device content to be
played when the TV turns on automatically. Select TV or
USB. (USB can be selected only when a USB device is
connected to the TV.)
Antenna (when Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
✎
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
✎
When there is only one photo file in the USB, the
Slide Show will not play.
✎
If a folder name is too long, the folder cannot be
selected.
✎
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each USB
have different names.
: Three different on / off
00 am
00 am
Channel
Air 0
Fri Sat
2010-05-17 3:44:50