Idiomas disponibles
Idiomas disponibles
•
Enter the unit price using the 0 to 9 numeric keys (on the control
panel), then press the [CHG./STORE] button and next the [Mx] button
(where x = 1 to 7). The unit price will be saved (if another unit price
has already been saved under the Mx button, it will be replaced with
the new price).
•
a) To calculate the change calculator, press the STORE/CHG button during
weighing.
b) On the display, "WEIGHT" will show a CH9 notification, indicating that it
enters the balance calculation mode.
c)
Using the numeric keys from 0 to 9, enter the value for which the change
is to be calculated. The entered value will appear on the "UNIT PRICE"
display.
d) The "TOTAL PRICE" display will show the calculated change.
VI.
M1-M7 keys for memorizing the unit price.
VII.
"+" - The function of adding.
•
For example: the current scale value is 10.00 and the value being
added is 20.00.
Press 20 on the number keys and then press the "+" button. The new
total value will be displayed: 30.00.
VIII.
Alarm messages displayed.
DISPLAY
--- OL --- (Alarm)
--- Lb --- (Alarm)
3.4.
Cleaning and maintenance
a)
Pull out the mains plug before each cleaning and when the unit is not in use.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
e)
Make sure that no water enters through the ventilation openings in the casing.
Remembering the unit price:
Change calculation function
With the "+" key, a value can be added to obtain an added value
without weighing the products again.
MEANING
Overload
The voltage is
below 3.6 volts
DESCRIPTION
The weighed items should be
removed immediately
from the scale
The battery should be immediately
charged
