Working Instructions; Service And Maintenance; Environment - Festool SCA 8 Manual De Instrucciones

English
("self-check") and then indicates the operating
condition of the charger:
LED yellow – continuous light
Charger is ready to use.
Green LED – flashing
Battery pack is charging.
Green LED – steady light – READY
READY
The battery pack is > 80% charged and ready for
use. In the background, the battery pack will
continue to be charged up to 100%.
LED red – flashing
General fault indicator, e.g. not in full contact,
short circuit, faulty battery pack, etc.
LED red – continuous light
Battery temperature is outside the permitted
range. As soon as the permitted temperature is
reached, the charger automatically switches to
charging.
> 45 min
30 min
Remaining charge time (SCA 8 only)
15 min
5 min
In addition, the SCA 8 charger indicates the
maximum remaining charge time on the LEDs
[1-3]:
► Insert the battery pack
The charge status display flashes several
times.
Maximum remaining charge time is displayed
by the corresponding LED flashing.
6.3

Working instructions

Continuous or several consecutive charging cy­
cles can cause the charger to heat up. However,
this does not do any harm and does not indicate
a technical fault.
When kept in the charger, battery packs remain
fully charged.
Only charge battery packs in a well-ventilated
area.
AIRSTREAM (SCA 8 only)
The SCA 8 charger is fitted with a fan and ac­
tively supports cooling of the BP 18 Li-AS bat­
tery packs.
7

Service and maintenance

Observe the following information:
– Keep the connecting contacts on the charg­
er clean.
Do not cover the vents [1-6] on the SCA 8
–
charger.
10
Customer service and repairs
must only be carried out by the
manufacturer or service work­
shops. Find the nearest address
at: www.festool.co.uk/service
Always use original Festool
EKAT
spare parts. Order no. at:
4
www.festool.co.uk/service
5
3
2
1
8

Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equipment
and implementation in national law, used power
tools must be collected separately and handed
in for environmentally friendly recycling.
Information on REACH: www.festool.com/reach